Vantage

Programming the SPEED DIAL numbers on the NT Vantage

- Go to extension # 38

- the phone (xtn 38) should be idle.

- Put 'System Option Template' on phone.

- Press: 'Set/Line Options' , you will dial tone

- dial 8977

- two buttons will begin to flash: System Options and Set/Line Options

- Press 'System Options', you will hear 1-sec. burst of dial tone.

- Press 'Speed Dial'

** speed dial light will light-up solid

- dial a 2-digit memory location # ( 30-61)

- 'Speed Dial' light will flash rapidly.

- Dial the phone number to be programmed. (you will not hear tones)

- Press the 'Speed Dial' button when done.

- 'Speed Dial' light will extinguish and you will hear 1-sec. burst of dial tone.

- That number is now programmed.

            - You can press the 'Speed Dial' button to repeat (go to ** )

            - OR press 'Disconnect' to stop programming.

NOTE:  If at anytime you think you are lost or have messed-up, press 'Disconnect' and start-over.